Klimaire DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct
current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result
different running speeds of the compressor.
Klimaire Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energyefficient method of inverting the current.
DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power.
Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically.
Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off.
Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature.
When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter
the heat loss or heat gain of the building. By this way it will maintain a constant temperature.

PRODUCT DETAILS:

About Klimaire

WARRANTY FROM THE MANUFACTURER

· 5-year on compressor and 1-year other parts.
* Registration card will be sent in the package; this card should be filled by HVAC technician (installer). A lot of customers have called us asking if they install the unit without the licensed AC Company, will their warranty be void? Answer to that question is Yes. Unfortunately no brand or manufacturer can take the responsibility of the equipment if it was not professionally installed.

Kingersons Store Warranty: If anything defective or damaged upon delivery contact Kingersons within 15 days. Kingersons at that point will provide free replacement. After first 30 days, your warranty for parts and compressor is moved from Kingersons to the Manufacturer.
Manufacturer warranty: Once the warranty rolls over to the manufacturer, you will have a toll free number for your tech support for any assistance you may need with the product in future. On Air Conditoners you will receive five years on compressor and one year on parts from them.
TIP: Installing a split AC is easy for any AC company, but can get tricky for a homeowner. In many cities it is illegal to touch a refrigerant and perform other such activities without a license. We as a company cannot encourage a customer to install the split AC, but have seen a lot of customers do it in the past. At the same time we have seen some customers installing the unit unprofessionally without performing all the necessary steps, which resulted in issues with the AC unit within the first 3 months.

In short, you can do all the handyman work yourself but can hire an AC company to finish the important process on the Split unit. For example you can drill the hole in the wall, hang the indoor unit on the wall carefully and then place the outdoor unit outside on a concrete pad or a flat surface. But there are some steps you cannot perform, as you do not have tools for it. Which is where your AC Company gets involved to finish all the necessary steps. For example they will need to vacuum the lines, check for the leaks and then release the refrigerant.
Also, remember no matter how good of an install kit the manufacturer provides, these steps are a must for a successful split AC installation. Some company's selling split AC will make you believe their installation kit is quick connect, which means you do not have to have a AC company to install it. But that is not true. Our install kits are “quick connect” too, but any thing can go wrong during the shipment or the parts in the package. For example the copper lines may have a small hole from manufacturing defect. So for example if the lines are not tested for leaks, the refrigerant will leak slowly after installation and within 1-2 months your AC will stop working and you will end up paying $500 or more to have more refrigerant added. So it is worth having it installed the right way to begin with. Your local AC Company can charge you on an hourly basis and above-mentioned process should not take more than 1-2 hours. But if they install the whole unit from scratch to finish, number of hours can vary depending upon each individual situation. This process will not only ensure you have a working split AC for a long time, but at the same time you will have an energy efficient AC that saves you electricity bills as well.